The ACPI_BIOS_ERROR bug check has a value of 0x000000A5. This bug check indicates that the Advanced Configuration and Power Interface (ACPI) BIOS of the computer is not fully compliant with the ACPI specification.
The ACPI_BIOS_FATAL_ERROR bug check has a value of 0x000000E0. This indicates that one of your computer components is faulty.
The ACPI_DRIVER_INTERNAL bug check has a value of 0x000000A3. This bug check indicates that the ACPI driver detected an internal inconsistency.
The ACTIVE_EX_WORKER_THREAD_TERMINATION bug check has a value of 0x000000E9. This indicates that an active executive worker thread is being terminated.
The AGP_GART_CORRUPTION bug check has a value of 0x00000105. This indicates that the Graphics Aperture Remapping Table (GART) is corrupt.
The AGP_ILLEGALLY_REPROGRAMMED bug check has a value of 0x00000106. This indicates that the Accelerated Graphics Port (AGP) hardware has been reprogrammed by an unauthorized agent.
The AGP_INTERNAL bug check has a value of 0x00000115. This indicates that the accelerated graphics port (AGP) driver has detected a violation.
The AGP_INVALID_ACCESS bug check has a value of 0x00000104. This indicates that the GPU wrote to a range of Accelerated Graphics Port (AGP) memory that had not previously been committed.
The APC_INDEX_MISMATCH bug check has a value of 0x00000001. This indicates that there has been a mismatch in the APC state index.
The APP_TAGGING_INITIALIZATION_FAILED bug check has a value of 0x0000010A.
The ASSIGN_DRIVE_LETTERS_FAILED bug check has a value of 0x00000072.
The ATDISK_DRIVER_INTERNAL bug check has a value of 0x00000042.
The ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY bug check has a value of 0x000000FC. This indicates that an attempt was made to execute non-executable memory.
The ATTEMPTED_SWITCH_FROM_DPC bug check has a value of 0x000000B8. This indicates that an illegal operation was attempted by a delayed procedure call (DPC) routine.
The ATTEMPTED_WRITE_TO_CM_PROTECTED_STORAGE bug check has a value of 0x0000011C. This bug check indicates that an attempt was made to write to the read-only protected storage of the configuration manager.
The ATTEMPTED_WRITE_TO_READONLY_MEMORY bug check has a value of 0x000000BE. This is issued if a driver attempts to write to a read-only memory segment.
The BAD_EXHANDLE bug check has a value of 0x000000A7. This bug check indicates that the kernel-mode handle table detected an inconsistent handle table entry state.
The BAD_POOL_CALLER bug check has a value of 0x000000C2. This indicates that the current thread is making a bad pool request.
The BAD_POOL_HEADER bug check has a value of 0x00000019. This indicates that a pool header is corrupt.
The BAD_SYSTEM_CONFIG_INFO bug check has a value of 0x00000074. This bug check indicates that there is an error in the registry.
The BOUND_IMAGE_UNSUPPORTED bug check has a value of 0x00000097.
The BUGCODE_ID_DRIVER bug check has a value of 0x000000D2. This indicates that a problem occurred with an NDIS driver.
The BUGCODE_NDIS_DRIVER bug check has a value of 0x0000007C. This bug check indicates that a problem occurred with an NDIS driver.
The BUGCODE_USB3_DRIVER bug check has a value of 0x00000144. This is the code used for all USB 3 bug checks. Parameter 1 specifies the type of the USB 3 bug check, and the meanings of the other parameters are dependent on Parameter 1.
The BUGCODE_USB_DRIVER bug check has a value of 0x000000FE. This indicates that an error has occurred in a universal serial bus (USB) driver.
The CACHE_INITIALIZATION_FAILED bug check has a value of 0x00000066.
The CACHE_MANAGER bug check has a value of 0x00000034. This indicates that a problem occurred in the file system's cache manager.
The CANCEL_STATE_IN_COMPLETED_IRP bug check has a value of 0x00000048. This indicates that an I/O request packet (IRP) was completed, and then was subsequently canceled.
The CANNOT_WRITE_CONFIGURATION bug check has a value of 0x00000075. This bug check indicates that the SYSTEM registry hive file cannot be converted to a mapped file.
The CDFS_FILE_SYSTEM bug check has a value of 0x00000026. This indicates that a problem occurred in the CD file system.
The CHIPSET_DETECTED_ERROR bug check has a value of 0x000000B9.
The CID_HANDLE_CREATION bug check has a value of 0x00000016.
The CID_HANDLE_DELETION bug check has a value of 0x00000017.
The CLOCK_WATCHDOG_TIMEOUT bug check has a value of 0x00000101. This indicates that an expected clock interrupt on a secondary processor, in a multi-processor system, was not received within the allocated interval.
The CNSS_FILE_SYSTEM_FILTER bug check has a value of 0x000000A4. This bug check indicates that a problem occurred in the CNSS file system filter.
The CONFIG_INITIALIZATION_FAILED bug check has a value of 0x00000067. This bug check indicates that the registry configuration failed.
The CONFIG_LIST_FAILED bug check has a value of 0x00000073. This bug check indicates that one of the top-level registry keys, also known as core system hives, cannot be linked in the registry tree.
The CORRUPT_ACCESS_TOKEN bug check has a value of 0x00000028.
The CREATE_DELETE_LOCK_NOT_LOCKED bug check has a value of 0x00000014.
The CRITICAL_OBJECT_TERMINATION bug check has a value of 0x000000F4. This indicates that a process or thread crucial to system operation has unexpectedly exited or been terminated.
The CRITICAL_PROCESS_DIED bug check has a value of 0x000000EF. This indicates that a critical system process died.
The CRITICAL_SERVICE_FAILED bug check has a value of 0x0000005A.
The CRITICAL_STRUCTURE_CORRUPTION bug check has a value of 0x00000109. This indicates that the kernel has detected critical kernel code or data corruption.
The DATA_BUS_ERROR bug check has a value of 0x0000002E. This typically indicates that a parity error in system memory has been detected.
The DATA_COHERENCY_EXCEPTION bug check has a value of 0x00000055.
The DEREF_UNKNOWN_LOGON_SESSION bug check has a value of 0x00000046.
The DEVICE_QUEUE_NOT_BUSY bug check has a value of 0x00000002.
The DEVICE_REFERENCE_COUNT_NOT_ZERO bug check has a value of 0x00000036. This indicates that a driver attempted to delete a device object that still had a positive reference count.
The DFS_FILE_SYSTEM bug check has a value of 0x00000082.
The DIRTY_MAPPED_PAGES_CONGESTION bug check has a value of 0x000000EB. This indicates that no free pages are available to continue operations.
English
Deutsch
Español
Italiano
Français
Indonesia
Nederlands
Nynorsk
Português
Русский
Українська
Türkçe
Malay
Dansk
Polski
Română
Suomi
Svenska
Tiếng việt
Čeština
العربية
ไทย
日本語
简体中文
한국어