Bsod Errors

0x000000A5

The ACPI_BIOS_ERROR bug check has a value of 0x000000A5. This bug check indicates that the Advanced Configuration and Power Interface (ACPI) BIOS of the computer is not fully compliant with the ACPI specification.

0x000000E0

The ACPI_BIOS_FATAL_ERROR bug check has a value of 0x000000E0. This indicates that one of your computer components is faulty.

0x000000A3

The ACPI_DRIVER_INTERNAL bug check has a value of 0x000000A3. This bug check indicates that the ACPI driver detected an internal inconsistency.

0x000000E9

The ACTIVE_EX_WORKER_THREAD_TERMINATION bug check has a value of 0x000000E9. This indicates that an active executive worker thread is being terminated.

0x00000105

The AGP_GART_CORRUPTION bug check has a value of 0x00000105. This indicates that the Graphics Aperture Remapping Table (GART) is corrupt.

0x00000106

The AGP_ILLEGALLY_REPROGRAMMED bug check has a value of 0x00000106. This indicates that the Accelerated Graphics Port (AGP) hardware has been reprogrammed by an unauthorized agent.

0x00000115

The AGP_INTERNAL bug check has a value of 0x00000115. This indicates that the accelerated graphics port (AGP) driver has detected a violation.

0x00000104

The AGP_INVALID_ACCESS bug check has a value of 0x00000104. This indicates that the GPU wrote to a range of Accelerated Graphics Port (AGP) memory that had not previously been committed.

0x00000001

The APC_INDEX_MISMATCH bug check has a value of 0x00000001. This indicates that there has been a mismatch in the APC state index.

0x0000010A

The APP_TAGGING_INITIALIZATION_FAILED bug check has a value of 0x0000010A.

0x00000072

The ASSIGN_DRIVE_LETTERS_FAILED bug check has a value of 0x00000072.

0x00000042

The ATDISK_DRIVER_INTERNAL bug check has a value of 0x00000042.

0x000000FC

The ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY bug check has a value of 0x000000FC. This indicates that an attempt was made to execute non-executable memory.

0x000000B8

The ATTEMPTED_SWITCH_FROM_DPC bug check has a value of 0x000000B8. This indicates that an illegal operation was attempted by a delayed procedure call (DPC) routine.

0x0000011C

The ATTEMPTED_WRITE_TO_CM_PROTECTED_STORAGE bug check has a value of 0x0000011C. This bug check indicates that an attempt was made to write to the read-only protected storage of the configuration manager.

0x000000BE

The ATTEMPTED_WRITE_TO_READONLY_MEMORY bug check has a value of 0x000000BE. This is issued if a driver attempts to write to a read-only memory segment.

0x000000A7

The BAD_EXHANDLE bug check has a value of 0x000000A7. This bug check indicates that the kernel-mode handle table detected an inconsistent handle table entry state.

0x000000C2

The BAD_POOL_CALLER bug check has a value of 0x000000C2. This indicates that the current thread is making a bad pool request.

0x00000019

The BAD_POOL_HEADER bug check has a value of 0x00000019. This indicates that a pool header is corrupt.

0x00000074

The BAD_SYSTEM_CONFIG_INFO bug check has a value of 0x00000074. This bug check indicates that there is an error in the registry.

0x00000097

The BOUND_IMAGE_UNSUPPORTED bug check has a value of 0x00000097.

0x000000D2

The BUGCODE_ID_DRIVER bug check has a value of 0x000000D2. This indicates that a problem occurred with an NDIS driver.

0x0000007C

The BUGCODE_NDIS_DRIVER bug check has a value of 0x0000007C. This bug check indicates that a problem occurred with an NDIS driver.

0x00000144

The BUGCODE_USB3_DRIVER bug check has a value of 0x00000144. This is the code used for all USB 3 bug checks. Parameter 1 specifies the type of the USB 3 bug check, and the meanings of the other parameters are dependent on Parameter 1.

0x000000FE

The BUGCODE_USB_DRIVER bug check has a value of 0x000000FE. This indicates that an error has occurred in a universal serial bus (USB) driver.

0x00000066

The CACHE_INITIALIZATION_FAILED bug check has a value of 0x00000066.

0x00000034

The CACHE_MANAGER bug check has a value of 0x00000034. This indicates that a problem occurred in the file system's cache manager.

0x00000048

The CANCEL_STATE_IN_COMPLETED_IRP bug check has a value of 0x00000048. This indicates that an I/O request packet (IRP) was completed, and then was subsequently canceled.

0x00000075

The CANNOT_WRITE_CONFIGURATION bug check has a value of 0x00000075. This bug check indicates that the SYSTEM registry hive file cannot be converted to a mapped file.

0x00000026

The CDFS_FILE_SYSTEM bug check has a value of 0x00000026. This indicates that a problem occurred in the CD file system.

0x000000B9

The CHIPSET_DETECTED_ERROR bug check has a value of 0x000000B9.

0x00000016

The CID_HANDLE_CREATION bug check has a value of 0x00000016.

0x00000017

The CID_HANDLE_DELETION bug check has a value of 0x00000017.

0x00000101

The CLOCK_WATCHDOG_TIMEOUT bug check has a value of 0x00000101. This indicates that an expected clock interrupt on a secondary processor, in a multi-processor system, was not received within the allocated interval.

0x000000A4

The CNSS_FILE_SYSTEM_FILTER bug check has a value of 0x000000A4. This bug check indicates that a problem occurred in the CNSS file system filter.

0x00000067

The CONFIG_INITIALIZATION_FAILED bug check has a value of 0x00000067. This bug check indicates that the registry configuration failed.

0x00000073

The CONFIG_LIST_FAILED bug check has a value of 0x00000073. This bug check indicates that one of the top-level registry keys, also known as core system hives, cannot be linked in the registry tree.

0x00000028

The CORRUPT_ACCESS_TOKEN bug check has a value of 0x00000028.

0x00000014

The CREATE_DELETE_LOCK_NOT_LOCKED bug check has a value of 0x00000014.

0x000000F4

The CRITICAL_OBJECT_TERMINATION bug check has a value of 0x000000F4. This indicates that a process or thread crucial to system operation has unexpectedly exited or been terminated.

0x000000EF

The CRITICAL_PROCESS_DIED bug check has a value of 0x000000EF. This indicates that a critical system process died.

0x0000005A

The CRITICAL_SERVICE_FAILED bug check has a value of 0x0000005A.

0x00000109

The CRITICAL_STRUCTURE_CORRUPTION bug check has a value of 0x00000109. This indicates that the kernel has detected critical kernel code or data corruption.

0x0000002E

The DATA_BUS_ERROR bug check has a value of 0x0000002E. This typically indicates that a parity error in system memory has been detected.

0x00000055

The DATA_COHERENCY_EXCEPTION bug check has a value of 0x00000055.

0x00000046

The DEREF_UNKNOWN_LOGON_SESSION bug check has a value of 0x00000046.

0x00000002

The DEVICE_QUEUE_NOT_BUSY bug check has a value of 0x00000002.

0x00000036

The DEVICE_REFERENCE_COUNT_NOT_ZERO bug check has a value of 0x00000036. This indicates that a driver attempted to delete a device object that still had a positive reference count.

0x00000082

The DFS_FILE_SYSTEM bug check has a value of 0x00000082.

0x000000EB

The DIRTY_MAPPED_PAGES_CONGESTION bug check has a value of 0x000000EB. This indicates that no free pages are available to continue operations.