The USER_MODE_HEALTH_MONITOR bug check has a value of 0x0000009E. This bug check indicates that one or more critical user-mode components failed to satisfy a health check.
The VIDEO_DRIVER_DEBUG_REPORT_REQUEST bug check has a value of 0x000000AD. This bug check indicates that the video port created a non-fatal minidump on behalf of the video driver during run time.
The VIDEO_DRIVER_INIT_FAILURE bug check has a value of 0x000000B4. This indicates that Windows was unable to enter graphics mode.
The VIDEO_DXGKRNL_FATAL_ERROR bug check has a value of 0x00000113. This indicates that the Microsoft DirectX graphics kernel subsystem has detected a violation.
The VIDEO_MEMORY_MANAGEMENT_INTERNAL bug check has a value of 0x0000010E. This indicates that the video memory manager has encountered a condition that it is unable to recover from.
The VIDEO_SCHEDULER_INTERNAL_ERROR bug check has a value of 0x00000119. This indicates that the video scheduler has detected a fatal violation.
The VIDEO_SHADOW_DRIVER_FATAL_ERROR bug check has a value of 0x00000114. This indicates that the shadow driver has detected a violation.
The VIDEO_TDR_ ERROR bug check has a value of 0x00000116. This indicates that an attempt to reset the display driver and recover from a timeout failed.
The VIDEO_TDR_TIMEOUT_DETECTED bug check has a value of 0x00000117. This indicates that the display driver failed to respond in a timely fashion.
The WDF_VIOLATION bug check has a value of 0x0000010D. This indicates that Kernel-Mode Driver Framework (KMDF) detected that Windows found an error in a framework-based driver.
The WHEA_INTERNAL_ERROR bug check has a value of 0x00000122. This bug check indicates that an internal error in the Windows Hardware Error Architecture (WHEA) has occurred. Errors can result from a bug in the implementation of a platform-specific hardware
The WHEA_UNCORRECTABLE_ERROR bug check has a value of 0x00000124. This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA).
The WORKER_INVALID bug check has a value of 0x000000E4. This indicates that memory that should not contain an executive worker item does contain such an item, or that a currently active worker item was queued.
The WORKER_THREAD_RETURNED_AT_BAD_IRQL bug check has a value of 0x000000E1. This indicates that a worker thread completed and returned with IRQL >= DISPATCH_LEVEL.
The XNS_INTERNAL_ERROR bug check has a value of 0x00000057.
The ACPI_BIOS_ERROR bug check has a value of 0x000000A5. This bug check indicates that the Advanced Configuration and Power Interface (ACPI) BIOS of the computer is not fully compliant with the ACPI specification.
The ACPI_BIOS_FATAL_ERROR bug check has a value of 0x000000E0. This indicates that one of your computer components is faulty.
The ACPI_DRIVER_INTERNAL bug check has a value of 0x000000A3. This bug check indicates that the ACPI driver detected an internal inconsistency.
The ACTIVE_EX_WORKER_THREAD_TERMINATION bug check has a value of 0x000000E9. This indicates that an active executive worker thread is being terminated.
The AGP_GART_CORRUPTION bug check has a value of 0x00000105. This indicates that the Graphics Aperture Remapping Table (GART) is corrupt.
The AGP_ILLEGALLY_REPROGRAMMED bug check has a value of 0x00000106. This indicates that the Accelerated Graphics Port (AGP) hardware has been reprogrammed by an unauthorized agent.
The AGP_INTERNAL bug check has a value of 0x00000115. This indicates that the accelerated graphics port (AGP) driver has detected a violation.
The AGP_INVALID_ACCESS bug check has a value of 0x00000104. This indicates that the GPU wrote to a range of Accelerated Graphics Port (AGP) memory that had not previously been committed.
The APC_INDEX_MISMATCH bug check has a value of 0x00000001. This indicates that there has been a mismatch in the APC state index.
The APP_TAGGING_INITIALIZATION_FAILED bug check has a value of 0x0000010A.
The ASSIGN_DRIVE_LETTERS_FAILED bug check has a value of 0x00000072.
The ATDISK_DRIVER_INTERNAL bug check has a value of 0x00000042.
The ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY bug check has a value of 0x000000FC. This indicates that an attempt was made to execute non-executable memory.
The ATTEMPTED_SWITCH_FROM_DPC bug check has a value of 0x000000B8. This indicates that an illegal operation was attempted by a delayed procedure call (DPC) routine.
The ATTEMPTED_WRITE_TO_CM_PROTECTED_STORAGE bug check has a value of 0x0000011C. This bug check indicates that an attempt was made to write to the read-only protected storage of the configuration manager.
The ATTEMPTED_WRITE_TO_READONLY_MEMORY bug check has a value of 0x000000BE. This is issued if a driver attempts to write to a read-only memory segment.
The BAD_EXHANDLE bug check has a value of 0x000000A7. This bug check indicates that the kernel-mode handle table detected an inconsistent handle table entry state.
The BAD_POOL_CALLER bug check has a value of 0x000000C2. This indicates that the current thread is making a bad pool request.
The BAD_POOL_HEADER bug check has a value of 0x00000019. This indicates that a pool header is corrupt.
The BAD_SYSTEM_CONFIG_INFO bug check has a value of 0x00000074. This bug check indicates that there is an error in the registry.
The BOUND_IMAGE_UNSUPPORTED bug check has a value of 0x00000097.
The BUGCODE_ID_DRIVER bug check has a value of 0x000000D2. This indicates that a problem occurred with an NDIS driver.
The BUGCODE_NDIS_DRIVER bug check has a value of 0x0000007C. This bug check indicates that a problem occurred with an NDIS driver.
The BUGCODE_USB3_DRIVER bug check has a value of 0x00000144. This is the code used for all USB 3 bug checks. Parameter 1 specifies the type of the USB 3 bug check, and the meanings of the other parameters are dependent on Parameter 1.
The BUGCODE_USB_DRIVER bug check has a value of 0x000000FE. This indicates that an error has occurred in a universal serial bus (USB) driver.
The CACHE_INITIALIZATION_FAILED bug check has a value of 0x00000066.
The CACHE_MANAGER bug check has a value of 0x00000034. This indicates that a problem occurred in the file system's cache manager.
The CANCEL_STATE_IN_COMPLETED_IRP bug check has a value of 0x00000048. This indicates that an I/O request packet (IRP) was completed, and then was subsequently canceled.
The CANNOT_WRITE_CONFIGURATION bug check has a value of 0x00000075. This bug check indicates that the SYSTEM registry hive file cannot be converted to a mapped file.
The CDFS_FILE_SYSTEM bug check has a value of 0x00000026. This indicates that a problem occurred in the CD file system.
The CHIPSET_DETECTED_ERROR bug check has a value of 0x000000B9.
The CID_HANDLE_CREATION bug check has a value of 0x00000016.
The CID_HANDLE_DELETION bug check has a value of 0x00000017.
The CLOCK_WATCHDOG_TIMEOUT bug check has a value of 0x00000101. This indicates that an expected clock interrupt on a secondary processor, in a multi-processor system, was not received within the allocated interval.
The CNSS_FILE_SYSTEM_FILTER bug check has a value of 0x000000A4. This bug check indicates that a problem occurred in the CNSS file system filter.
English
Deutsch
Español
Italiano
Français
Indonesia
Nederlands
Nynorsk
Português
Русский
Українська
Türkçe
Malay
Dansk
Polski
Română
Suomi
Svenska
Tiếng việt
Čeština
العربية
ไทย
日本語
简体中文
한국어