Adaptec Drivers Download

You can find a list of Adaptec drivers on this page. To download a particular Adaptec driver, simply select it from the list below. Our website provides drivers for such operating systems as Windows 10, 11, 7, 8 / 8.1, Vista and Windows XP (64/32 Bit). If you are not sure what type of driver is right for you, we recommend downloading a special utility that will automatically select a proper driver for your system. The utility identifies over ten million devices and is easy to use. To start the download, please, click here.

HardDisk Controllers (425) Network cards (13)
Motherboards (23) Audio cards (4)
USB devices (8)

The CP210x is a family of USB-to-UART bridge controllers developed by Silicon Laboratories. These devices enable USB connectivity to devices that have UART interfaces, such as microcontrollers and embedded systems. CP210x devices offer features such as voltage regulators, programmable GPIO pins, and UART signal inversion. The devices are supported by a range of operating systems and require drivers for proper functioning. The CP210x Port Read/Write Example illustrates how the GPIO latch can be read from and written to. The CP210x-program project on GitHub provides an open-source tool for programming CP210x devices. The CP210x USB to UART Bridge Virtual COM Port (VCP) drivers are available on the Silicon Labs website.

To update the CP210x driver automatically using a driver updater, follow these steps:

  1. Download and install a reputable driver updater program.
  2. Open the driver updater program and click on the "Scan" button.
  3. Wait for the program to scan your computer for outdated drivers.
  4. Locate the CP210x driver in the list of outdated drivers and click on the "Update" button next to it.
  5. Wait for the driver updater program to download and install the latest version of the CP210x driver.
  6. Restart your computer to complete the driver installation.

CP210x specifications:

Model Voltage range Maximum data rate GPIO pins Package type
CP2101 3.0-3.6V 1 Mbps 0 QFN-28
CP2102 3.0-3.6V 1 Mbps 4 QFN-28
CP2103 3.0-3.6V 1 Mbps 4 QFN-28
CP2104 2.7-3.6V 2 Mbps 4 QFN-28
CP2105 3.0-3.6V 1 Mbps 4 QFN-28
CP2108 2.7-3.6V 2 Mbps 16 QFN-32

CP210x Review

CP210x is a USB-to-UART bridge controller chip manufactured by Silicon Labs, which provides a convenient and efficient way to interface with devices through USB. The CP210x chip is widely used in various applications, such as in industrial control systems, medical devices, and communication equipment. The CP210x chip supports high-speed data transfer rates of up to 3Mbps, and provides a low-power consumption mode for battery-powered applications.

One advantage of the CP210x chip is its ease of use, with a wide range of development tools and software support available from Silicon Labs. However, one potential drawback of the CP210x chip is its dependency on proper driver installation and enumeration. This can sometimes be a challenge, requiring troubleshooting techniques to ensure proper function.

In summary, the CP210x is a versatile and reliable USB-to-UART bridge controller chip that is widely used in many applications. While it has many advantages, proper driver installation and enumeration can sometimes be a challenge, requiring troubleshooting to ensure proper function. Nevertheless, with its high-speed data transfer rates and low power consumption, the CP210x is an excellent choice for interfacing with devices through USB.

Pros:

  • High-speed data transfer rates of up to 3Mbps
  • Low power consumption mode for battery-powered applications
  • Wide range of development tools and software support available from Silicon Labs

Cons:

  • Dependency on proper driver installation and enumeration, which can be a challenge and require troubleshooting to ensure proper function.

Frequently Asked Questions (FAQ)

Q: Why is my CP210x device not recognized by my computer?

A: Make sure that the device is properly connected to the computer and that the drivers are installed correctly. Try restarting the computer or using a different USB port.

Q: How do I install the CP210x driver on Windows 10?

A: Download and install the CP210x driver from the Silicon Labs website. Connect the device to the computer and wait for the driver installation to complete.

Q: Why is my CP210x device not working properly?

 

A: Check that the device is properly connected and that the drivers are installed correctly. Make sure that the device settings are configured correctly for your application. Try updating the drivers or reinstalling the software.

Was this page helpful?

What percentage of users, installed Adaptec drivers?

95% installed a driver

What percent of users has not helped this article?

5% not helped