Bsod Errors

PROCESS1_I

The PROCESS1_INITIALIZATION_FAILED bug check has a value of 0x0000006B. This bug check indicates that the initialization of the Microsoft Windows operating system failed.

PROCESS_HA

The PROCESS_HAS_LOCKED_PAGES bug check has a value of 0x00000076. This bug check indicates that a driver failed to release locked pages after an I/O operation, or that it attempted to unlock pages that were already unlocked.

PROCESS_IN

The PROCESS_INITIALIZATION_FAILED bug check has a value of 0x00000060.

QUOTA_UNDE

The QUOTA_UNDERFLOW bug check has a value of 0x00000021. This indicates that quota charges have been mishandled by returning more quota to a particular block than was previously charged.

RAMDISK_BO

The RAMDISK_BOOT_INITIALIZATION_FAILED bug check has a value of 0x000000F8. This indicates that an initialization failure occurred while attempting to boot from the RAM disk.

RDR_FILE_S

The RDR_FILE_SYSTEM bug check has a value of 0x00000027. This indicates that a problem occurred in the SMB redirector file system.

RECURSIVE_

The RECURSIVE_NMI bug check has a value of 0x00000111. This bug check indicates that a non-maskable-interrupt (NMI) occurred while a previous NMI was in progress.

REFERENCE_

The REFERENCE_BY_POINTER bug check has a value of 0x00000018. This indicates that the reference count of an object is illegal for the current state of the object.

REFMON_INI

The REFMON_INITIALIZATION_FAILED bug check has a value of 0x0000006C.

REF_UNKNOW

The REF_UNKNOWN_LOGON_SESSION bug check has a value of 0x00000047.

REGISTRY_E

The REGISTRY_ERROR bug check has a value of 0x00000051. This indicates that a severe registry error has occurred.

RESERVE_QU

The RESERVE_QUEUE_OVERFLOW bug check has a value of 0x000000FF. This indicates that an attempt was made to insert a new item into a reserve queue, causing the queue to overflow.

RESOURCE_M

The RESOURCE_MANAGER_EXCEPTION_NOT_HANDLED bug check has a value of 0x0000010F. This indicates that the kernel transaction manager detected that a kernel-mode resource manager has raised an exception in response to a direct call-back. The resource manager

RESOURCE_N

The RESOURCE_NOT_OWNED bug check has a value of 0x000000E3. This indicates that a thread tried to release a resource it did not own.

SCSI_DISK_

The SCSI_DISK_DRIVER_INTERNAL bug check has a value of 0x0000002D.

SCSI_VERIF

The SCSI_VERIFIER_DETECTED_VIOLATION bug check has a value of 0x000000F1. This is the bug check code for all Driver Verifier SCSI Verification violations.

SECURITY1_

The SECURITY1_INITIALIZATION_FAILED bug check has a value of 0x00000063.

SECURITY_I

The SECURITY_INITIALIZATION_FAILED bug check has a value of 0x0000005F.

SECURITY_S

The SECURITY_SYSTEM bug check has a value of 0x00000029.

SERIAL_DRI

The SERIAL_DRIVER_INTERNAL bug check has a value of 0x00000038.

SESSION1_I

The SESSION1_INITIALIZATION_FAILED bug check has a value of 0x0000006D. This bug check indicates that the initialization of the Microsoft Windows operating system failed.

SESSION2_I

The SESSION2_INITIALIZATION_FAILED bug check has a value of 0x0000006E. This bug check indicates that the initialization of the Microsoft Windows operating system failed.

SESSION3_I

The SESSION3_INITIALIZATION_FAILED bug check has a value of 0x0000006F. This bug check indicates that the initialization of the Microsoft Windows operating system failed.

SESSION4_I

The SESSION4_INITIALIZATION_FAILED bug check has a value of 0x00000070. This bug check indicates that the initialization of the Microsoft Windows operating system failed.

SESSION5_I

The SESSION5_INITIALIZATION_FAILED bug check has a value of 0x00000071. This bug check indicates that the initialization of the Microsoft Windows operating system failed.

SESSION_HA

The SESSION_HAS_VALID_POOL_ON_EXIT bug check has a value of 0x000000AB. This bug check indicates that a session unload occurred while a session driver still held memory.

SESSION_HA

The SESSION_HAS_VALID_SPECIAL_POOL_ON_EXIT bug check has a value of 0x000000EC. This indicates that a session unload occurred while a session driver still held memory.

SESSION_HA

The SESSION_HAS_VALID_VIEWS_ON_EXIT bug check has a value of 0x000000BA. This indicates that a session driver still had mapped views when the session unloaded.

SETUP_FAIL

The SETUP_FAILURE bug check has a value of 0x00000085. This bug check indicates that a fatal error occurred during setup.

SET_ENV_VA

The SET_ENV_VAR_FAILED bug check has a value of 0x0000005B.

SET_OF_INV

The SET_OF_INVALID_CONTEXT bug check has a value of 0x00000030. This indicates that the stack pointer in a trap frame had an invalid value.

SHARED_RES

The SHARED_RESOURCE_CONV_ERROR bug check has a value of 0x0000001F.

SOC_SUBSYS

The SOC_SUBSYSTEM_FAILURE bug check has a value of 0x0000014B. This indicates that an unrecoverable error was encountered in a System on a Chip (SoC) subsystem.

SPECIAL_PO

The SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION bug check has a value of 0x000000C1. This indicates that the driver wrote to an invalid section of the special pool.

SPIN_LOCK_

The SPIN_LOCK_ALREADY_OWNED bug check has a value of 0x0000000F. This indicates that a request for a spin lock has been initiated when the spin lock was already owned.

SPIN_LOCK_

The SPIN_LOCK_INIT_FAILURE bug check has a value of 0x00000081.

SPIN_LOCK_

The SPIN_LOCK_NOT_OWNED bug check has a value of 0x00000010.

STATUS_CAN

The STATUS_CANNOT_LOAD_REGISTRY_FILE bug check has a value of 0xC0000218. This indicates that a registry file could not be loaded.

STATUS_IMA

The STATUS_IMAGE_CHECKSUM_MISMATCH bug check has a value of 0xC0000221. This indicates that a driver or a system DLL has been corrupted.

STATUS_SYS

The STATUS_SYSTEM_PROCESS_TERMINATED bug check has a value of 0xC000021A. This means that an error has occurred in a crucial user-mode subsystem.

STREAMS_IN

The STREAMS_INTERNAL_ERROR bug check has a value of 0x0000004B.

SYMBOLIC_I

The SYMBOLIC_INITIALIZATION_FAILED bug check has a value of 0x00000064.

SYSTEM_EXI

The SYSTEM_EXIT_OWNED_MUTEX bug check has a value of 0x00000039. This indicates that the worker routine returned without releasing the mutex object that it owned.

SYSTEM_LIC

The SYSTEM_LICENSE_VIOLATION bug check has a value of 0x0000009A. This bug check indicates that the software license agreement has been violated.

SYSTEM_PTE

The SYSTEM_PTE_MISUSE bug check has a value of 0x000000DA. This indicates that a page table entry (PTE) routine has been used in an improper way.

SYSTEM_SCA

The SYSTEM_SCAN_AT_RAISED_IRQL_CAUGHT_IMPROPER_DRIVER_UNLOAD bug check has a value of 0x000000D4. This indicates that a driver did not cancel pending operations before unloading.

SYSTEM_SER

The SYSTEM_SERVICE_EXCEPTION bug check has a value of 0x0000003B. This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.

SYSTEM_THR

The SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug check has a value of 0x0000007E. This bug check indicates that a system thread generated an exception that the error handler did not catch.

SYSTEM_THR

The SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M bug check has a value of 0x1000007E. This indicates that a system thread generated an exception which the error handler did not catch.

SYSTEM_UNW

The SYSTEM_UNWIND_PREVIOUS_USER bug check has a value of 0x0000003A.